A stripped violinist rope can be annoying for treatment. Nobody wants to catch this situation! The truth is that some may be tempted to just drop the violin or take over a specialist and watch it. While this may be the best solution, you can try many things on the rope to move and re-adjust. Although I can not guarantee that this will not work 100 percent of the time, it is safe and will not damage the device while being cautious.
The first thing to remove the string if you can. If you are desperate and neither the string nor the peg moves away, remove the thread and remove all the other threads, either twist them or cut them with a wire cutter. This will relieve tension on the rope and provide much more room for work while discovering how to remove the rivet. All the chords of the chords put a lot of emphasis on how to capture the stuck pin as it gives another piece to the puzzle game. Do not let this happen to you.
Follow, try a screwdriver or a blunt angle and push it into the rope's inside. You want to make sure you do not twist the tap or anything else that surrounds it. This means we get some rounded peak. Take a soft hammer at the opposite end and try to touch the opposing side of the screwdriver by pushing the tap and pulling it out of the violin's face. Be gentle! Only a few mild hits must be made with a rubber pad or a hammer, and the pin must be pulled out and immediately movable.
Last thing you can try to bring lubricant and spray it inside the rope to make it easier to slip. From here you can try it from the inside or wear a dress and run around the rope. This makes it easier to grab the slider and quickly and without incident removes it. Be careful not to spray too much lubricant or you may not be able to catch the violins.
Source by Eric Conklin